My Publications

Refereed Journal Publications

  1. D.J. Duke, A.L. Clarke, A.L. Stephens, L. Djumas and S.D. Gregory,  A computational fluid dynamics assessment of 3D printed ventilator splitters and restrictors for differential multi-patient ventilation. 3D printing in medicine 8 (1), 1-14.
  2. A. Kastengren, K. Fezzaa, F. Z. Tilocco, D. Duke, A. B. Swantek and C. F. Powell, “X-Ray Radiography and Phase-Contrast Imaging of the Engine Combustion Network Spray B Sprays and Injection,” Atomization and Sprays 31(8):33–53, 2021.
  3. D. J. Duke, D. T. Nguyen, L. Gomes dos Reis, D. M. Silva, A. Neild, D. Edgington-Mitchell, P. M. Young and D. R. Honnery, “Increasing the Fine Particle Fraction of Pressurised Metered Dose Inhaler Solutions with Novel Actuator Shapes,” Int J Pharm, doi: 10.1016/j.ijpharm.2021.120341, Mar 2021.
  4. D. Edgington-Mitchell, T. Wang, P. Nogueira, O. Schmidt, V. Jaunet, D. Duke, P. Jordan & A. Towne, “Waves in Screeching Jets”,  J Fluid Mech, 913, A7. doi:10.1017/jfm.2020.1175, Feb 2021.
  5. D. J. Duke, “Gaining new insights into pressurized metered dose inhaler (pMDI) design using synchrotron radiation,” Inhalation 14(2) pp. 10-17, April 2020.
  6. V. Sechenyh, D. J. Duke, A. Swantek, K. Matusik, A. Kastengren, C. Powell, A. Viera, R. Payri and C. Crua, “Quantitative analysis of dribble volumes and rates using three-dimensional reconstruction of X-ray and diffused back-illumination images of diesel sprays,” Int J Engine Res 21(1) pp. 43-54, 2020. doi:10.1177/1468087419860955
  7. H. Liu, D. Edgington-Mitchell, D. Nguyen, H. Zhao, D. Duke, J. Soria and D. Honnery, ” Effect of turbulence on drop breakup in counter air flow,” Int J Multiphase Flow 120, 10308, 2019.
  8. K. E. Matusik, B. A. Sforzo, H. J. Seong, D. J. Duke, A. L. Kastengren, J. Ilavsky and C. F. Powell, “X-ray Measurements of Fuel Spray Specific Surface Area and Sauter Mean Diameter for Cavitating and Non-Cavitating Diesel Sprays,” Atomization and Sprays 29(3) pp. 199-216, 2019.
  9. D. J. Duke, H. N. Scott, A. J. Kusangaya, A. L. Kastengren, K. E. Matusik, P. Young, D. Lewis and D. Honnery, “Drug distribution transients in solution and suspension-based pressurised metered dose inhaler sprays,” Int. J. Pharmaceutics 566 pp. 463-475, July 2019, doi: 10.1016/j.ijpharm.2019.05.067
  10. D. Duke, T. Knast, B. Thethy, L. Gisler and D. Edgington-Mitchell,  “A low-cost high-speed CMOS camera for scientific imaging,” Meas. Sci. Technol. 30(7), 075403. doi:10.1088/1361-6501/ab1832. June 2019.
  11. G. L. Martinez, F. Poursadegh, G. M. Magnotti, K. E. Matusik, D. J. Duke, B. W. Knox, C. L. Genzale, C. F. Powell and A. L. Kastengren, “Measurement of Sauter Mean Diameter (SMD) in Diesel Sprays Using a Scattering-Absoprtion Measurement Ratio Technique”, Int J. Engine Research 20(1) pp. 6-17, 2018, doi:10.1177/1468087418819912.
  12. M. Battistoni, G. Magnotti, C. Genzale, K. Matusik, D. Duke, J. Ilavsky, A. Kastengren, J. Giraldo, C. Powell, M. Arienti, P. Marti-Aldaravi, “Experimental and Computational Investigation of Subcritical Near-Nozzle Spray Structure and Primary Atomization in the Engine Combustion Network Spray D,” SAE Int. J. Fuels Lubr. 11(4):337-352, 2018,  doi:10.4271/2018-01-0277.
  13. D. Duke, A. Kastengren, K. Matusik and C. F. Powell, “Hard X-ray Fluorescence Spectroscopy of High Pressure Cavitating Fluids in Aluminum Nozzles,” Int. J. Multiphase Flow 108 pp. 69-79. doi: 10.1016/j.ijmultiphaseflow.2018.05.026
  14. K. E. Matusik, D. J. Duke, A. L. Kastengren, N. Sovis, A. B. Swantek and C. F. Powell, “High–resolution X–ray tomography of Engine Combustion Network diesel injectors,” Int. J. Engine Res 19(9) pp. 963-976. doi: 10.1177/1468087417736985
  15. Matusik, K., Duke, D., Kastengren, A., and Powell, C., “X-Ray Radiography Measurements of the Thermal Energy in Spark Ignition Plasma at Variable Ambient Conditions,” SAE Int. J. Engines 10(5):2017, doi:10.4271/2017-24-0178.
  16. D. Duke, A. Kastengren, K. Matusik, A. Swantek, C. Powell, R. Payri, D. Vaquerizo, L. Itani, D. Schmidt, R. Grover Jr, S. Parrish, L. Markle, J. Manin, S. Skeen and L. Pickett, “Internal and Near Nozzle Measurements of Engine Combustion Network “Spray G” Gasoline Direct Injectors,” Experimental Thermal and Fluid Science 88 pp. 608-621, Nov 2017, doi:10.1016/j.expthermflusci.2017.07.015.
  17. A. B. Swantek, D. J. Duke, A. L. Kastengren, N. Sovis and C. F. Powell, “An Experimental Investigation of Gas Fuel Injection with X-ray Radiography,” Experimental Thermal and Fluid Science 87 pp. 15-29. doi: 10.1016/j.expthermflusci.2017.04.016.
  18. D. Nguyen, D. Duke, A. Kastengren, K. Matusik, A. Swantek, C. Powell and D. Honnery, “Spray flow structure from twin-hole diesel injector nozzles,” Experimental and Thermal Fluid Science 86 pp. 235-247, Sep 2017, doi: 10.1016/j.expthermflusci.2017.04.020.
  19. Duke, D., Finney, C., Kastengren, A., Matusik, K. et al., “High-Resolution X-Ray and Neutron Computed Tomography of an Engine Combustion Network Spray G Gasoline Injector,” SAE Int. J. Fuels Lubr. 10(2):2017, doi:10.4271/2017-01-0824.
  20. A. Kastengren, J. Ilavsky, J. P. Viera, R. Payri, D. Duke, A. Swantek, F. Tilocco, N. Sovis and C. Powell, “Measurements of Droplet Size in Shear-Driven Atomization Using Ultra-Small Angle X-Ray Scattering,” Int J Multiphase Flow 92(131-139), June 2017, doi:10.1016/j.ijmultiphaseflow.2017.03.005
  21. A. Pandal, J. M. Pastor, R. Payri, A. Kastengren, D. Duke, K. Matusik, J. S. Giraldo, C. F. Powell and D. P. Schmidt, “Computational and Experimental Investigation of Interfacial Area in Near-Field Diesel Spray Simulations,” SAE Int. J. Fuels Lubr. 10(2):2017, doi:10.4271/2017-01-0859
  22. D. J. Duke, A. B. Swantek, K. E. Matusik, N. Sovis, A. L. Kastengren, J. P. Viera, R. Payri and C. F. Powell, “X-ray radiography of cavitation in a beryllium alloy nozzle,”  International Journal of Engine Research 18(1-2) pp. 39-50, Feb. 2017, doi:10.1177/1468087416685965
  23. N. Mason-Smith, D. J. Duke, A. L. Kastengren, D. Traini, P. M. Young, Y. Chen, D. A. Lewis, D. Edgington-Mitchell and D. Honnery, “Revealing pMDI spray initial conditions: Flashing, atomisation and the effect of ethanol,” Pharmaceutical Research 34(4) pp. 718-729, Apr. 2017. doi:10.1007/s11095-017-2098-2
  24. D. Duke, A. Kastengren, A. Swantek, K. Matusik and C. Powell, “X-ray Fluorescence Measurements of Dissolved Gas and Cavitation,” Exp. Fluids 57(10), pp. 1-14, Sep. 2016. doi: 10.1007/s00348-016-2250-5
  25. E. T. Baldwin, D. P. Schmidt, R. O. Grover, Jr, S. E. Parrish, D. J. Duke, K. E. Matusik, C. F. Powell and A. L. Kastengren, “String Flash-Boiling in Gasoline Direction Injection Simulations with Transient Needle Motion,” Int. J. Multiphase Flow 87 pp. 90-101, Dec. 2016.
  26. A. L. Kastengren, D. J. Duke, A. B. Swantek, J. M. Sevik, T. Wallner, C. F. Powell, “Time-Resolved X-Ray Radiography of Spark Ignition Plasma”,  SAE Int. J. Engines 9(2), 2016, doi:10.4271/2016-01-0640.
  27. N. Mason-Smith, D. J. Duke, A. L. Kastengren, P. J. Stewart, D. Traini, P. M. Young, Y. Chen, D. A. Lewis, J. Soria, D. Edgington-Mitchell and D. Honnery, “Insights into spray development from metered-dose inhalers through quantitative X-ray radiography,” Pharmaceutical Research 33(5) pp. 1249-1258, May 2016.
  28. J. P. Viera, R. Payri, A. B. Swantek, D. J. Duke, N. Sovis, A. L. Kastengren and C. F. Powell, “Linking instantaneous rate of injection to partial needle lift measurements performed through x-ray imaging,” Energy Conversion and Management 112, pp. 350-358, 2016.
  29. D. J. Duke, A. L. Kastengren, N. Mason-Smith, Y. Chen, P. M. Young, D. Traini, D. Lewis, D. Edgington-Mitchell and D. Honnery, “Temporally and spatially resolved x-ray fluorescence measurements of in-situ drug concentration in metered-dose inhaler sprays,” Pharmaceutical Research 33(4) pp. 816-825, 2016.
  30. D. J. Duke, N. Sovis, A. B. Swantek, F. Z. Tilocco, A. L. Kastengren, D. Gürsoy and T. Biçer, “Time-Resolved X-ray Tomography of Gasoline Direct Injection Sprays,” SAE Int. J. Engines 9(1), 2016, doi:10.4271/2015-01-1873.
  31. D. J. Duke, A. B Swantek, N. Sovis, C. F. Powell, A. L. Kastengren and K. Fezzaa, “Recent Developments in X-ray Diagnostics for Cavitation,” SAE International Journal of Fuels and Lubricants, 8(1) pp. 135-146, April 2015.
  32. A. B. Swantek, A. L. Kastengren, D. J. Duke, F. Zak Tilocco, N. Sovis and C. F. Powell, “Quantification of shot to shot variation in single-hole diesel injectors,” SAE International Journal of Fuels and Lubricants, 8(1) pp. 160-166, April 2015.
  33. Z. Wang, A. B. Swantek, R. Scarcelli, D. J. Duke, A. L. Kastengren, C. F. Powell and S. Som, R. Reese, K. Freeman and Y. Zhu, “LES of Diesel and Gasoline Sprays with Validation against X-ray Radiography Data,” SAE International Journal of Fuels and Lubricants, 8(1) pp. 147-159, April 2015.
  34. D. J. Duke, D. Honnery and J. Soria, “The growth of instabilities in annular liquid sheets,” Experimental Thermal and Fluid Science 68 pp. 89-99, April 2015.
  35. M. Battistoni, D. J. Duke, A. B. Swantek, F. Zak Tilocco, C. F. Powell and S. Som, “Effects of Non-Condensable Gas on Cavitating Nozzles,” Atomization and Sprays, 25(6) pp. 453-483, 2015. doi: 10.1615/AtomizSpr.2015011076
  36. D. J. Duke, A. B. Swantek, F. Zak Tilocco, C. F. Powell, A. L. Kastengren, K. Fezzaa, K. Neroorkar, M. Moulai and D. P. Schmidt, “X-ray Imaging of Cavitation in Diesel Injectors,” SAE International Journal of Engines 7(2) pp. 1003-1016, July 2014. doi: 10.4271/2014-01-1404
  37. N. A. Buchmann, D. J. Duke, S. A. Shakiba, D. M. Mitchell, P. J. Stewart, D. Traini, P. M. Young, D. A. Lewis, J. Soria and D. Honnery, “A novel high-speed imaging technique to predict the macroscopic spray characteristics of solution based pressurised Metered Dose Inhalers,”  Pharmaceutical Research, 31(11) pp. 2963-74, June 2014 doi: 10.1007/s11095-014-1391-6
  38. D. J. Duke, A. L. Kastengren, F. Zak Tilocco, A. B. Swantek and C. F. Powell (2013), “X-ray Radiography Measurements of Cavitating Nozzle Flow,” Atomization and Sprays, 23(9) pp. 841-860
  39. A. L. Kastengren, F. Z. Tilocco, D. Duke, C. F. Powell, S. Moon and X. Zhang (2014), “Time-Resolved X-ray Radiography of Sprays from Engine Combustion Network Spray A Diesel Injectors”, Atomization and Sprays 24(3) pp. 251-272
  40. D. J. Duke, D. P. Schmidt, K. Neroorkar, A. L. Kastengren & C. F. Powell (2013), “High Resolution Large Eddy Simulations of Cavitating Gasoline-Ethanol Blends,” Int. J. Engine Research 14(6) pp. 594-605
  41. D. Duke, D. Honnery & J. Soria (2011), “Experimental Investigation of Nonlinear Instabilities in Annular Liquid Sheets,” J Fluid Mech 691 pp.594-604
  42. D. Duke, J. Soria & D. Honnery (2011), “An Error Analysis of the Dynamic Mode Decomposition,” Exp Fluids 52(2) pp. 529-542 doi: 10.1007/s00348-011-1235-7
  43. D. Duke, D. Honnery & J. Soria (2011), “A comparison of subpixel edge detection and correlation algorithms for the measurement of sprays”, Int J Spray Combustion Dynamics 3(2) pp. 93-110
  44. D. Duke, D. Honnery & J. Soria (2010), “A cross-correlation velocimetry technique for breakup of an annular liquid sheet,” Exp Fluids 49 pp.435-445
    DOI 10.1007/s00348-009-0817-0    .
  45. R Mathis, D Duke, V Kitsios and Julio Soria (2008), “Use of zero-net-mass-flow for separation control in diffusing S-duct“, Experimental Thermal and Fluid Science 33(1)  pp. 169-172.

Refereed Conference Papers

  1. D. Duke, L. Rao, N. Marasini, H. X. Ong, D. Schmidt, B. Myatt, P. Cocks & P. Young, “In-Silico Prediction of pMDI performance with low-GWP propellants HFA-152a and HFO-1234ze(E),” Proceedings of Drug Delivery to the Lungs, Edinburgh, pp. 30-33, Dec. 2022.
  2. N. Marasini, V. Koala, L. Rao, D. Duke, D. Honnery, S. W. Stein, B. Meat, P. Cocks, H. X. Ong & P. Young, “Solution-based pressurized metered dose inhaler formulations using HFA134a, HFA152a and HFO1234ze(E) propellants: Analysis of size, aerosolization performance and particle morphology,” Proceedings of Drug Delivery to the Lungs, Edinburgh, pp. 167-170, Dec. 2022.
  3. S. Vutlapalli, L. Rao, B. Wyatt, P. Cocks, P. Young, D. Honnery & D. Duke, “Saturated Vapor pressure of HFA152a-ethanol and HFO1234ze(E)-ethanol binary mixtures,” Proceedings of Drug Delivery to the Lungs, Edinburgh, pp. 171-174, Dec. 2022.
  4. L. Rao, A. J. Kusangaya, N. Marasini, H. X. Ong, B. Myatt, P. Cocks, D. Honnery, P. Young & D. J. Duke, “In-Vitro Evaluation of pMDI Spray Development of HFA134a, HFA152a and HFO1234ze(E)”, Proceedings of Drug Delivery to the Lungs, Edinburgh, pp. 179-182, Dec. 2022.
  5. D. J. Duke, D. T. Nguyen, H. N. Scott, A. J. Kusangaya, A. L. Kastengren, D. Schmidt and D. Honnery, “Combining Modelling with Advanced Experimental Techniques to Optimize Formulation and Nozzle Design for Low GWP pMDIs,” Proceedings of Respiratory Drug Delivery 2021. Edited by Dalby, RN, Byron, PR, Peart, J, Suman, JD and Farr, SJ. In press.
  6. H. N. Scott, D. T. Nguyen, D. R. Honnery and D. J. Duke, “Using the Plateau-Rayleigh Instability to Produce HFA152a Droplets,” Proceedings of Respiratory Drug Delivery 2021. Edited by Dalby, RN, Byron, PR, Peart, J, Suman, JD and Farr, SJ. In press.
  7. M. J. Sanders, D. J. Duke and D. Honnery, “Acoustic pMDI Patient Guidance Device: Impact on Drug Delivery,” Proceedings of Respiratory Drug Delivery 2020 vol. 2 pp. 323-328, 2020.
  8. D. J. Duke, B. Sforzo, A. Kastengren, P. Young, and D. Honnery, “X-ray and optical assessment of alternative propellant P-152a in PMDI sprays,” J. Aerosol Medicine and Pulmonary Drug Delivery 33(2) pp. A8, April 2020.
  9. M Sanders, R Johnson, P Young, D J Duke, D. Honnery and C. Tran, “Understanding flow rate influence on Clip-Tone Guided Inhaler Delivery,” J. Aerosol Medicine and Pulmonary Drug Delivery 33(2) pp. A20-21, April 2020.
  10. Harry N. Scott, Dung T. Nguyen, Daniel J. Duke & Damon Honnery, Plateau-Rayleigh Breakup of Supercooled Refrigerant Droplets, Proc. 9th Australian Conference on Laser Diagnostics, Adelaide, Australia, December 2-4, 2019.
  11. D. Edgington-Mitchell, D. Duke, T. Wang, D. Harris, O. Schmidt, V. Jaunet, P. Jordan and A. Towne, “Modulation of downstream-propagating waves in aeroacoustic resonance,” Proc. 2019 AIAA/CEAS Aeroacoustics Conference, doi:10.2514/6.2019-2689.
  12. P. Mitra, E. Baldwin, K. Matusik, D. Duke, C. Powell, M. Arienti, L. Pickett, J. Manin, K. Yasutomi, P. Srivastava, P. Senecal, D. Schmidt, “Identification and Characterization of Steady State Spray Conditions in Convergent, Single-Hole Diesel Injectors,” SAE Technical Paper 2019-01-0281, 2019, doi:10.4271/2019-01-0281.
  13. G. Jacobsohn, C. Mohapatra, D. Duke and D. Schmidt, “Comparison of Turbulence Modeling Methods for Evaluating GDI Sprays with Transient Needle Motion,” SAE Technical Paper 2019-01-0271, 2019, doi:10.4271/2019-01-0271.

  14. D. Duke, T. Knast & D. Edgington-Mitchell, “Low cost high speed digital cameras for experimental fluid mechanics,” Proc. 2018 AFMC, 21st Australasian Fluid Mechanics Conference, Adelaide, Australia.

  15. D. J. Duke, N. Mason-Smith, A. L. Kastengren, J. Ilavsky, P. Young, D. Traini, D. Lewis, D. Edgington-Mitchell and D. Honnery, “Multimodal X-ray and laser diagnostics for pressurized metered dose inhaler sprays,” Proc. ICLASS 2018, 14th triennial conference on liquid atomization and spray systems, Chicago USA, July 2018.
  16. K. E. Matusik, B. A. Sforzo, H. J. Seong, D. J. Duke, A. L. Kastengren, J. Ilavsky, and C. F. Powell, “X-Ray Measurements of Fuel Spray Specific Surface Area and Sauter Mean Diameter for Cavitating and Non-Cavitating Diesel Sprays,” Proc. ICLASS 2018, 14th triennial conference on liquid atomization and spray systems, Chicago USA, July 2018.
  17. D. J. Duke, N. Mason-Smith, D. Edgington-Mitchell, A. L. Kastengren, J. Ilavsky, P. Young, D. Traini, D. Lewis and D. Honnery, “Synchrotron X-ray Measurements of pMDI Sprays: Enabling Improved Nozzle Design,” Proceedings of Respiratory Drug Delivery 2018, Volume 1, pp. 189-200.
  18. N. Mason-Smith, D.J. Duke, A.L. Kastengren, D. Traini, P.M. Young, Y. Chen, D. Lewis, D. Edgington-Mitchell and D.R. Honnery, “High-speed x-ray imaging of pressurized metered-dose inhaler sprays with variable ethanol content,” Proc. ILASS-Asia 19th Conference on Liquid Atomization and Spray Systems, Jeju, Korea, Oct. 2017.
  19. J.M. García-Oliver, J.M. Pastor, A. Pandal, B. Naud, K. Matusik. D. Duke, A. Kastengren, C. Powell and D.P.Schmidt, “Modelling and validation of near-field Diesel spray CFD simulations based on the Σ -Y model,” Proc. ILASS-2017, 28th European Conference on Liquid Atomization and Spray Systems, Valencia, Spain, Sep. 2017.
  20. V. Sechenyh, J. Turner, V. Stetsyuk, D. Sykes, C. Crua, D. J. Duke, A. B. Swantek, K. E. Matusik, A. L. Kastengren, C. F. Powell, A. Viera and R. Payri, “Quantification of diesel injector overspill using 3D reconstruction from x-ray and shadowgraphic imaging,”  Proc. ILASS-2017, 28th European Conference on Liquid Atomization and Spray Systems, Valencia, Spain, Sep. 2017.doi:10.4995/ILASS2017.2017.4742.
  21. K. Matusik. A. L. Kastengren, D. J. Duke, C. F. Powell, “X-Ray Radiography Measurements of the Thermal Energy in Spark Ignition Plasma at Variable Ambient Conditions,” ICE2017,13th SAE International Conference on Engines and Vehicles, Capri, Italy, September 2017.
  22. D. Duke, K. Matusik. A. Kastengren and C. Powell, “X-ray Fluorescence Measurements of Hydraulic Flip in a Beryllium Nozzle”, Proc. 29th ILASS-Americas conference on Liquid Atomization and Spray Systems, Atlanta, May 2017.
  23. G. M. Magnotti, K. E. Matusik, D. J. Duke, B. W. Knox, G. L. Martinez, C. F. Powell, A. L. Kastengren, C. L. Genzale, “Modeling the Influence of Nozzle-Generated Turbulence on Diesel Sprays,” Proc. 29th ILASS-Americas conference on Liquid Atomization and Spray Systems, Atlanta, May 2017.
  24. G. L. Martinez, G. M. Magnotti, B. W. Knox, C. L. Genzale, K. E. Matusik, D. J. Duke, C. F. Powell and A. L. Kastengren, “Quantification of Sauter Mean Diameter in Diesel Sprays using Scattering-Absorption Extinction Measurements,” Proc. 29th ILASS-Americas conference on Liquid Atomization and Spray Systems, Atlanta, May 2017.
  25. N. Mason-Smith, D.J. Duke, J.S. Harkess, D. Edgington-Mitchell and D.R. Honnery, “Acoustic unsteadiness of sprays from pressurised metered-dose inhalers,” Proc. 20th Australasian Fluid Mechanics Conference, Perth, Australia, 5-8 Dec 2016.
  26. D. Honnery, N. Mason-Smith, D. Duke, A. Kastengren, Y. Chen, P. Young, D. Traini, D. Lewis and D. Edgington-Mitchell, “New Insights into pMDI Operation Using Synchrotron X-Ray Techniques,” Proc. Respiratory Drug Delivery Asia 2016, Vol. 1 pp. 209-220, November 2016.
  27. D. J. Duke, A. B. Swantek, K. E. Matusik, A. L. Kastengren, J. P. Viera, R. Payri and C. F. Powell, “X-ray radiography of cavitation in a beryllium alloy nozzle,” Proceedings of the THIESEL 2016 Conference on Thermo- and Fluid Dynamic Processes in Direct Injection Engines, Valencia, Spain, 13-16 September 2016.
  28. D. J. Duke, A. L. Kastengren, A. B. Swantek, K. E. Matusik, R. Payri, J. P. Viera and C. F. Powell, “Time-Resolved X-ray Radiography of Cavitation in a Metal Nozzle,” Proc. ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, 4-7 September 2016, Brighton, UK.
  29. L. Bravo, D. Kim, F. Ham, A. Kastengren, A. Swantek, D. Duke, R. Kmak, C. Powell and C-B Kweon, “Numerical Investigation of Liquid Jet Disintegration and Droplet Statistics from a Diesel Injector,” Proc. 52nd AIAA/SAE/ASEE joint propulsion conference, Salt Lake City, 25-27 July 2016.
  30. Matusik, D. Duke, C. Powell and A. Kastengren, “High Resolution X-ray Tomography of Injection Nozzles,” Proc. ILASS-Americas 28th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, MI, May 2016.
  31. D. J. Duke, A. Swantek, K. Matusik, C. Powell, A. Kastengren, J. Viera, R. Payri and D. Schmidt, “X-ray radiography measurements and numerical simulations of cavitation in a metal nozzle,” Proc. ILASS-Americas 28th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, MI, May 2016.
  32. E. Baldwin, R. Grover Jr, D. Duke, K. Matusik, A. Kastengren, C. Powell, S. Parrish and D. Schmidt, “String Flash-Boiling in Flashing and Non-Flashing Gasoline Direction Injection Simulations with Transient Needle Motion,” Proc. ILASS-Americas 28th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, MI, May 2016.
  33. P. Strek, D. Duke, A. Swantek, A. Kastengren, C. F. Powell, D. P. Schmidt, “X-Ray Radiography and CFD Studies of the Spray G Injector”,  SAE Technical Paper 2016-01-0858, presented at the SAE World Congress, Detroit, MI, April 2016.
  34. L. Bartolucci, R. Scarcelli, T. Wallner, A. Swantek, D. Duke, A. Kastengren, C. F. Powell, “Gaseous Direct Injection from an Outward Opening Injector: CFD and X-ray Analysis”, SAE Technical Paper 2016-01-0850, presented at the SAE World Congress, Detroit, MI, April 2016.
  35. D. Honnery, N. Mason-Smith, D. Duke, A. Kastengren, Y. Chen, P. Young, D. Traini, D. Lewis and D. Edgington-Mitchell, “New Insights into pMDI Operation Using Synchrotron X-Ray Techniques,” Proc. Respiratory Drug Delivery Asia 2016, Goa, India, November 2016.
  36. D. J. Duke, “A Review of Synchrotron Radiation Diagnostics for Fluid Mechanics,” Proc. 7th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, Melbourne, Australia, December 2015, pp. 15-22.
  37. D. Nguyen, D. Duke, A. Kastengren, C. Powell and D. Honnery, “Common Rail Diesel Sprays from Twin-hole Nozzle,” Proc Australian Combustion Symposium, Dec 2015, Melbourne, Australia, pp. 200-203.
  38. N. Mason-Smith, D. Duke, M. Fedrizzi, J. Soria, D. Edgington-Mitchell and D. Honnery, “Back-Illumination Imaging of Pressurised Metered-Dose Inhaler Sprays,” Proc. 7th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, Melbourne, Australia, December 2015, pp. 45-50.
  39. Daniel J. Duke, Andrew B. Swantek, Alan L. Kastengren and Christopher F. Powell, “X-ray Diagnostics for Cavitating Nozzle Flow,” Journal of Physics: Conference Series 656 (2015) 012110.
  40. D. J. Duke, N. Sovis, A. B. Swantek, F. Z. Tilocco, A. L. Kastengren, D. Gürsoy and T. Biçer, “Time-Resolved X-ray Tomography of Gasoline Direct Injection Sprays,”  Paper 20159213, 2015 JSAE/SAE International Powertrains, Fuels & Lubricants Meeting, Kyoto, Japan, Sep. 2015.
  41. A. B. Swantek, D. J. Duke. C. F Powell and A. L. Kastengren, “An Examination of Spray Stochastics in Single-Hole Diesel Injectors,” SAE Technical Paper 2015-01-1834, 2015, doi:10.4271/2015-01-1834.
  42. A. B. Swantek, D. J. Duke, C. F. Powell and A. L. Kastengren, “Quantitative Measurements of Shot-To-Shot Variation in Diesel Sprays,” Proceedings of the 13th Triennial International Conference on Liquid Atomization and Spray Systems (ICLASS 2015), Tainan, Taiwan, Aug. 2015, in press. Accepted: 23/08/2015.
  43. D. J. Duke, M. Battistoni, A. B. Swantek, N. Sovis, A. L. Kastengren, C. F. Powell, S. Som and D. P. Schmidt, “Validation of Cavitation Simulations in Submerged Nozzles,” Proceedings of the ILASS-Americas 27th Annual Conference on Liquid Atomization and Spray Systems, Raleigh, NC, May 2015, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=957
  44. A. B. Swantek, D. J. Duke, C. F. Powell and A. L. Kastengren, “Fluctuation Mechanisms in Single Hole Diesel Injectors,” Proceedings of the ILASS-Americas 27th Annual Conference on Liquid Atomization and Spray Systems, Raleigh, NC, May 2015, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=995
  45. A. B. Swantek, A. L. Kastengren, D. Duke, F. Z. Tilocco, N. Sovis and C. F. Powell, “A further examination of fuel dribble from single hole diesel nozzles,” Proceedings of the ILASS-Europe 26th Annual Conference on Liquid Atomization and Spray Systems, L Achelis and U Fritsching, Eds., Bremen, Germany, Sep 2014, ISBN: 978-3-00-047070-7.
  46. D. J. Duke, A. L. Kastengren, A. B. Swantek, N. Sovis, K. Fezzaa, K. Neroorkar, M. Moulai, C. F. Powell and D. P. Schmidt, “Comparing Simulations and X-ray Measurements of a Cavitating Nozzle,” Proceedings of the ILASS-Americas 26th Annual Conference on Liquid Atomization and Spray Systems, Portland, OR, May 2014, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=902
  47. A. B. Swantek, D. Duke, F. Z. Tilocco, N. Sovis and C. F. Powell, “End of Injection, Mass Expulsion Behaviors in Single Hole Diesel Fuel Injectors,” Proceedings of the ILASS-Americas 26th Annual Conference on Liquid Atomization and Spray Systems, Portland, OR, May 2014, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=906
  48. D. Duke, A. L. Kastengren, F. Z. Tilocco and C. F. Powell, “Synchrotron X-ray Measurements of Cavitation”, Proceedings of the ILASS-Americas 25th Annual Conference on Liquid Atomization and Spray Systems, Pittsburgh PA, May 2013, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=752
  49. C.F. Powell, D. Duke, A.L. Kastengren and J. Ilavsky, “Measurements of Diesel Spray Droplet Size with Ultra-Small Angle X-Ray Scattering,” Proceedings of the ILASS-Americas 25th Annual Conference on Liquid Atomization and Spray Systems p.76, 2013, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=801
  50. D. Duke, D. Honnery & J. Soria, “Empirical Scaling Analysis of Atomising Annular Liquid Sheets”, Proceedings of the 12th Triennial International Conference on Liquid Atomization and Spray Systems (ICLASS-2012), C. Tropea and E. Gutheil, Eds., Heidelberg, Germany, Sep. 2012, URL: http://ilasseurope.org/events/12th-iclass-conference/
  51. A Kastengren, F. Tilocco, D. Duke, C. F. Powell and S. Moon, “Time-Resolved X-Ray Radiography of Sprays from Engine Combustion Network Spray A Diesel Injectors”, Proceedings of the 12th Triennial International Conference on Liquid Atomization and Spray Systems (ICLASS 2012), C. Tropea and E. Gutheil, Eds., Heidelberg, Germany, Sep. 2012, URL: http://ilasseurope.org/events/12th-iclass-conference/
  52. Y. Mizuno, D. Duke, C. Atkinson & J. Soria, “Investigation of wall-bounded turbulent flow using Dynamic mode decomposition”, Journal of Physics: Conference Series 318, 042040, 2011.
  53. D. Duke, D. Honnery & J. Soria, “Empirical and theoretical analysis of the stability of an air-assisted atomising annular liquid sheet,” Proceedings of the 22nd Annual Conference on Liquid Atomisation and Spray Systems, (ILASS-Americas ), Cincinnati OH USA, May 2010, URL: http://www.ilass.org/2/database/Detail.aspx?AbstractID=479

Full Conference Papers Reviewed by Abstract

  1. D. J. Duke and D. P. Schmidt, “High-fidelity simulations of multi-component pressurised metered-dose inhaler sprays,” in Proceedings of Drug Delivery to the Lungs 31, The Aerosol Society (2020).
  2. D. Edgington-Mitchell, D Duke, O. Amili, J. Weightman, D. R Honnery and J. Soria, “Measuring shear layer growth rates in aeroacoustically forced axisymmetric supersonic jets,” Proc. 21st AIAA/CEAS Aeroacoustics Conference, Dallas, TX, June 2015.
  3. D. Duke, D. Honnery & J. Soria, “A PIV-Based Approach to the Stability Analysis of Multiphase Flows,” 8th International Symposium on Particle Image Velocimetry – PIV09 Melbourne, Victoria, Australia, August 2009.
  4. R. Mathis, D. Duke, V. Kitsios & J. Soria, “Flow control in S-Shaped Air Intake using Zero-Net-Mass-Flow,” 16th Australasian Fluid Mechanics Conference, Gold Coast, Australia, December 2007.

Other Conference Presentations and Posters

  1. D Duke, H Scott, A Kusangaya, A Kastengren, J Ilavsky, “Ultra Small Angle X-ray Scattering Measurements in Pharmaceutical Aerosols”, Bulletin of the American Physical Society, 2020 Meeting of the APS Division of Fluid Dynamics (virtual).
  2. S Darbha, D Duke, D Schmidt, “Role of Swirl in Fuel Injection Systems”, Bulletin of the American Physical Society, 2020 Meeting of the APS Division of Fluid Dynamics (virtual).
  3. Duke, Scott, Kusangaya, Sforzo, Matusik, Kastengren, Frith, Ilavsky, Lewis & Honnery, “Binary Aerosol Composition Measurements using Ultra Small Angle X-ray Scattering,” Bulletin of the American Physical Society, 22nd Meeting of the APS Division of Fluid Dynamics Meeting, Seattle, USA, Nov. 2019.
  4. D. Kim, L. Bravo, K. Matusik, D. Duke, A. Kastengren, A. Swantek, C. Powell and F. Ham, “Numerical Investigation on Sensitivity of Liquid Jet Breakup to Physical Fuel Properties with Experimental Comparison,” 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, OR, November 2016.
  5. D. Duke, A. Kastengren, N. Mason-Smith, D. Edgington-Mitchell and D. Honnery, “X-ray Fluorescence Measurements of Pharmaceutical Sprays,” Poster presentation, 65th Annual Denver X-ray Conference on Applications of X-ray Analysis, Chicago, Illinois, August 2016.
  6. D. Duke, “Internal Flow of Automotive Injectors,” invited panel presentation at the ILASS-Americas 28th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, MI, May 2016.
  7. D. Duke, A. Kastengren, N. Mason-Smith, D. Edgington-Mitchell and D. Honnery, “Improving Pharmaceutical Inhaler Design using Synchrotron X-rays,” Poster presentation, ILASS-Americas 28th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, MI, May 2016.
  8. D. Duke, A. Kastengren, N. Mason-Smith, D. Edgington-Mitchell and D. Honnery, “X-ray Fluorescence Measurements of Pharmaceutical Sprays,” Poster presentation, 2016 APS/CNM Users Meeting, Lemont, IL, May 2016.
  9. D. Duke, A. L. Kastengren, C. F. Powell, “Measuring Cavitation with Synchrotron X-Rays“, 65th Annual Meeting of the American Physical Society Division of Fluid Dynamics, San Diego, California, USA, November 2012.
  10. D. Duke, D. Honnery & J. Soria, “Flow Visualisation of Annular Liquid Sheet Instability & Atomisation“, 65th Annual Meeting of the American Physical Society Division of Fluid Dynamics, San Diego, California, USA, November 2012.
  11. D. Duke, A. L. Kastengren & C. F. Powell, “Synchrotron X-Ray Diagnostics for Cavitating Nozzle Flow”, Poster presentation, ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2012.
  12. D. Duke, J. Soria & D. Honnery, “Nonlinear Instabilities and Koopman Modes in Axisymmetric Multiphase Shear Flows,” 64th Annual Meeting of the American Physical Society Division of Fluid Dynamics, Baltimore, Maryland, USA, November 2011
  13. D. Duke, J. Soria & D. Honnery, “Experimental Analysis of the Instability and Breakup of an Annular Liquid Sheet with Axial Co-flow,” 63rd Annual Meeting of the American Physical Society Division of Fluid Dynamics, Long Beach, California, USA, November 2010
Other Reports and Monographs
  1. D. Duke, “Use of Zero Net Mass Flux Jets for Active Flow Control in an S-Shaped Diffuser”, Undergraduate Thesis.  LTRAC Technical Report 2007.001, 2007.
  2. D. Duke, “Development of Diagnostic Techniques for the Investigation of Instabilities in Annular Liquid Sheets”, PhD Thesis, Department of Mechanical & Aerospace Engineering, Monash University, Australia, 2011.
  3. C Powell, D Duke, A Kastengren, W Miller and F Z Tilocco, “Fuel Injection Technologies for Alternative Fuels, Korea Automotive Technology Institute”, September 19, 2012.
  4. C Powell, D Duke, A Kastengren, A Swantek, F Z Tilocco and J Wang, “X-Ray Studies of Delphi Diesel Injection Systems”, November 15 2013.
  5. W Church, S Ciatti, S McConnell, C Powell, D Duke, R Scarcelli, S Som and Z Wang, “Chrysler Multi Air Multi Fuel Project,” October 17, 2014.
  6. C Powell, D Duke, A Kastengren, N Sovis, A Swantek and F Z Tilocco, “Measurements of Caterpillar Injector Check Motion”, November 3, 2014.
  7. C Powell, D Duke, A Kastengren and A Swantek, “Measurements of Cummins Diesel Injection Nozzle Geometry,” October 1, 2015.
  8. C Powell, D Duke, A Kastengren, K Matusik and A Swantek, “Measurements of Diesel Injection Sprays for the US Army Research Laboratory”, January 8, 2016.

Forthcoming Publications

  1. D. J. Duke, H. N. Scott, A. J. Kusangaya, J. Ilavsky and A. Kastengren, “X-ray Scattering Techniques in Spray Research,” submitted to the 12th Australasian Heat and Mass Transfer Conference, Sydney, 2021.
  2. H. N. Scott, D. T. Nguyen, D. R. Honnery and D. J. Duke, “Plateau-Rayleigh Droplet Formation of Supercooled HFA152a Jets,” submitted to the 12th Australasian Heat and Mass Transfer Conference, Sydney, 2021.